BoomToneDJ Motion Beam 3 Mode D'emploi page 14

● Power consumption: 50W
● Dimensions ：450 × 180 × 300mm
● Weight: 8 kg
This BoomToneDJ fixture is complying with European standards: EN 2014/30/EU,
EN 2011/65/EU, EN 2014/35/EU.
4- Menu
DMX address
Channel mode
Slave mode
Auto mode
Sound Mode
Sound sense
Back light
Pan Inverse
Tilt Inverse
AutoTest
Fixture time
Software version
Reset
A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select SL1 or SL2 , Their DMX cables plugged into the DMX input jacks (daisy
chain) and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr, press ENTER, when the 1 is showing on the display.
Pressing ENTER. Use DOWN and UP button change the DMX512 address.
DMX Address (001-512)
6/12/21(1)/21(2)
Master mode
Slave 1
Slave 2
Auto 0—16 (speed 0—9)
Sound Mode 0-16
0-100 from slow to fast
On/off
Yes/No
Yes/No
Testing
Fixture work hours 0---9999
Ver
CH
14