Customer Support - Impecca RA-2106W Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Freezer not cold enough.
Light will not work.
Additional notes:
• Condensation may be detected on the exterior surface and door seals of the freezer when the ambient humidity is high. This is a
normal phenomenon, and the condensation can be wiped away with a dry towel.
• A slight buzzing noise will be generated by the compressor, especially when starting up or shutting down.

CUSTOMER SUPPORT

Before contacting customer support, please see the trouble- shooting guide above.
Visit our website to contact us, find answers to Frequently Asked Questions, and for other resources which may include an updated
version of this user's manual.
If you wish to contact us by phone, please be sure to have your model number and serial number ready and call us between 9:00am and
6:00pm ET, at +1 866-954-4440.
Keep tabs on Impecca's newest innovations & enter contests via our social network feeds:
• Temperature control too warm.
• Door not closed.
• Hot food inserted.
• Doors open too long/often.
• Wrong voltage is being used.
• No power to unit.
• Power cord is unplugged.
• Bulb is loose/needs replacing.
• Door switch is stuck.
WWW.IMPECCA.COM
www.facebook.com/Impecca/
www.instagram.com/impecca/
• Check/adjust settings as needed.
• Close door securely.
• Cool food before inserting.
• Minimize door openings/ duration.
• Use proper voltage.
• Check connection of power cord to power
source.
• Plug in unit.
• Tighten or replace bulb.
• Check the switch for obstructions, clean if
necessary.
@impeccausa
–10–

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ra-2106kRa-2106sl

Table des Matières