Bluetooth Mode - Krüger & Matz KM0526 Mode D'emploi

Owner's manual
INSTALLATION
1. Connect the speakers with the speaker cable.
2. Connect the external device to the selected input of the speakers with a proper
cable.
Notice: Please pay attention to the proper connection of the cables with the inputs.
3. Connect the speaker to the power supply mains with the power cable.
4. Set all knobs to the minimum.
5. Turn on the device by setting the power switch in ON position.
6. Adjust all the knobs.

BLUETOOTH MODE

1. Make sure the speaker is turned on.
2. Please keep the speaker and external device close to each other when pairing.
3. Press Mode button to enter Bluetooth pairing mode.
4. Enable the Bluetooth function on the external device and search for new
Bluetooth devices.
5. Select and connect with this device „KM WAVE".
6. Start playing music from the external device.
15