Function; Hot Water - Würth LATENTO 500 Notice De Montage

5. Function

Unpressurised hot water storage tank:
The storage water in the LATENTO is only used for heat
absorption. The heat is fed in and taken via heat exchangers.
Hence the storage water does not have any contact to the
heating or DHW system. Thereby problems such as furing up
and sludge accumulation in the storage tank and legionella
growth in the DHW heat exchanger is prevented.

Hot water:

The hot water is heated following the continous flow heater
principle. Thereby the hot water is always generated whene-
ver required. The advantage: The water is fresh at all times,
and legionellae have no chance of growing. What`s more,
the stainless steel heat exchanger guarantees perfect drinking
water quality and corrosion resistance.
Electrical heating element:
Serving as stand-alone solution (power supply only via solar collectors and elec-
trical heating element) or when heat pumps are employed for peak demand, an
electrical heating element with an output of 3, 6 or 9 kW is optionally offered.
Caution
24
The electrical heating element must only be operated when
the LATENTO is sufficiently filled with water. Fire hazard! The
electrical heating element must only be connected through an
authorized professional electrician.
Illustrations similar