Technical Support - DENTSPLY Cavitron Select SPS Instructions D'utilisation

Détartreur ultrasonique
Masquer les pouces Voir aussi pour Cavitron Select SPS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Introduction
Cavitron
Select™ SPS™ Ultrasonic Scaler with Cavitron
®
DENTSPLY
DENTSPLY Professional is an ISO9001 certified company. The
DENTSPLY
®
®
Cavitron
®
Select™ System is classified by Underwriters Laborato-
ries Inc. with respect to electric shock, fire, mechanical hazards
only in accordance UL 2601-1 1 and Can/CSA C22.2 NO. 601.1.
The Scaling System operates by converting ordinary AC house
current into high frequency current. The ultrasonic system consists
of two parts: an insert, and the SPS™ (Sustained Performance
System) electronic system. The system incorporates two closed
loops. One loop provides automatic tuning (operating frequency
is adjusted to be at resonance for each insert), the second
loop automatically controls the tip stroke over different working
conditions. The scaler produces 30,000 microscopically small
strokes per second at the insert's working tip. This combined with
acoustic effects of the coolant water, produces a synergistic action
that literally "powers away" the heaviest calculus deposits while
providing exceptional operator and patient comfort.
The Pump/Reservoir accessory for the Cavitron
is an optional lavage dispenser. Footswitch plug, handpiece plug,
water tube and power supply plug are removed from the Scaler
before mating with the Pump/Reservoir. The Scaler is snapped
together with the Pump/Reservoir. The footswitch plug, handpiece
plug and power supply plug are inserted into mating receptacles at
the rear of the Pump/Reservoir. Ultrasonic signal, footswitch and
DC power connections between the units are made via an edgecard
connector at the rear of the Scaler and the front of the Pump
Please read carefully and completely before operating unit.
module. The Reservoir has a
module. The Reservoir has a capacity of 450 ml. Fluid fro
module. The Reservoir has a capacity of 450 ml. Fluid fro
Reservoir is propelled from the Reservoir Bottle with 15–19 psig
compressed air generated by an internal diaphragm pump.
ON/OFF of the lavage is controlled through an internal solenoid
valve. Fluid to the Handpiece passes directly from the Pump/
Reservoir to the Handpiece. No fluid passes through the Cavitron
Select™ SPS™ when used with this accessory. Flow through any
insert in the Handpiece will be greater than 40 cc/m water when
adjusted to maximum.

Technical Support

For technical support and repair assistance in the U.S., call
1-800-989-8826 Monday through Friday, 8:00 AM to 5:00 PM
(Eastern Time). For other areas, contact your local DENTSPLY
(Eastern Time). For other areas, contact your local DENTSPLY
(Eastern Time). For other areas, contact your local DENTSPLY
representative.
Supplies & Replacement Parts
®
Select™ SPS™
To order supplies or replacement parts in the U.S., contact
your local DENTSPLY Distributor or call 1-800-989-8826
your local DENTSPLY
your local DENTSPLY
Monday through Friday, 8:00 AM to 5:00 PM (Eastern Time).
For other areas, contact your local DENTSPLY representative.
For other areas, contact your local DENTSPLY
For other areas, contact your local DENTSPLY
Caution: U.S. Federal Law restricts this device to sale by or on the
order of a Dentist.
ENGLISH
Cavitron
Select™ SPS™
®
Ultrasonic Scaler
Cavitron
Select™ SPS™
®
Ultrasonic Scaler with
Cavitron
Select™
®
Reservoir System
Directions For Use
Select™ Reservoir System
®
®
®
m the
®
®
®
®
®
ENGLISH • 1

Publicité

Table des Matières
loading

Table des Matières