•
The surface must be stable.
Delivered mounting material is only for use with concrete or stone ceilings.
For other surfaces, use other dowels.
•
The product must be attached absolutely straight.
•
Plants, street lighting, reflective surfaces or randomly moving
objects must not be located in the detection range.
•
The recommended mounting height is 2-6 m.
2.
Drill 2 mounting holes in the ceiling by using suitable tools.
3. Put fitting dowels into the mouting holes.
4.
Tighten the motion sensor by a screwdriver.
5. Set the adjustments like shown in chapter 7.
6. Assemble the cover cap.
Fig. 8: Mounting place
Fig. 9: Mounting
16