Shure ANI22 Guide De L'utilisateur page 4

Step 3: Connect Devices in Dante Controller Software
1. Download and install Dante Controller Software from http://www.audinate.com
2. Use Dante Controller to create connections with other Dante devices
Note: Refer to the Dante Controller user guide for more information on channel routing
(available at http://www.audinate.com/resources/technical-documentation)
Example: Connecting the ANI22 and Shure MXA310
INPUT
OUTPUT
sig/clip
1 1
in1 power
in2 network
out1 network audio
2 2
out2 encryption
PoE
reset
ANI22
1. Find the MXA310 in the list of Dante transmitters, and select the plus sign (+) to show all
channels.
2. Find the ANI22 in the list of Dante receivers, and select the plus sign (+) to show all
channels.
Check the box where the MXA310 AUTOMIX OUT and the ANI22 DANTE INPUT 1
3.
intersect
4
MXA310