Important Product Information - Shure ANI22 Guide De L'utilisateur

Rack Ear Configuration
A combination of up to 3 Audio Network Interfaces can be mounted in a single 19-inch
rack space. The adjustable rack ears support mounting in a standard equipment rack or
underneath a table.
Standard 19" Rack Mount
1. Align the ears with the mounting
holes pointed forward.
2. Install the two screws that hold
the ear to the tray as shown.
Under-table Mounting
1. Align the ears with the mounting
holes pointed upward.
2. Install the two screws that hold
the ear to the tray as shown.
Installing Underneath a Table
1. Hold the tray in the desired location under a table
2. Use a pencil to mark the location of the mounting holes on the table.
3. Drill 4 holes for the screws. The diameter of the holes in the tray are 7.1 mm.
4. Install the components into the tray
5. Install with 4 screws to secure the tray underneath the table

Important Product Information

The equipment is intended to be used in
professional audio applications.
Note: This device is not intended to be
connected directly to a public internet
network.
EMC conformance to Environment E2:
Commercial and Light Industrial. Testing
is based on the use of supplied and
recommended cable types. The use of other
than shielded (screened) cable types may
degrade EMC performance.
Changes or modifications not expressly
approved by Shure Incorporated could void
your authority to operate this equipment.
Industry Canada ICES-003 Compliance
Label: CAN ICES-3 (B)/NMB-3(B)
Authorized under the verification provision
of FCC Part 15B.
Please follow your regional recycling
scheme for batteries, packaging, and
electronic waste.
10