Joerns Oxford Sangles Full Back Silkfit Manuel De L'utilisateur page 3

English
Fitting the Sling from a Seated Position
1
Raise the client's leg and feed the padded leg
piece under and up between the legs. Ensure that
the sling is not twisted or creased under the thigh.
Repeat this procedure for the other leg.
3
Raise lift to convenient height and attach the
shoulder straps as shown. You may then raise
the client to the required height. When seating
the client the hand grip on the back of the sling
may be used to ensure a good seated posture.
2
Feed the right leg support through the dignity strap
on the left leg support (optional). Cross over leg
straps, pass one leg strap through the other and
attach to hoist on front hooks.
GOLDEN TIPS
1. THE CLIENT'S POSTURE
CAN BE ALTERED BY
ADJUSTING BOTH
SHOULDER STRAPS.
2. IF IN DOUBT, ATTACH TO
COLOURED LOOPS.
3. KEEP SHOULDER STRAPS
AT EQUAL LENGTH.
Oxford
Full Back Silkfit Sling
®