Measuring Capacitance - SEFRAM 7352B Manuel D'utilisation

Measuring Capacitance

 CAUTION

To avoid possible damage to the meter or to the equipment
under test, disconnect circuit power and discharge all high-
voltage capacitors before measuring capacitance. Use the
dc voltage function to confirm that the capacitor is discharged.
The ranges of measuring capacitance are 40nF, 400nF, 4uF,
40uF, 400uF, 4mF and 40mF.
To improve the accuracy of measurements less than 1000nF,
you can use the relative (Δ) mode to subtract the residual
capacitance of the leads.
To use capacitance measurement, turn the rotary switch to
resistance position, then press the function (yellow) button to
select measuring mode.
14