Sennheiser audioport A 200 Notice D'emploi page 23

Specifications
Cleaning and replacing the ear pads
The product is supplied with two pairs of ear pads in different fits. You
can change to these ear pads to optimize the wearing comfort, if neces-
sary. Other spare ear pads are available from your Sennheiser partner.
1 Carefully remove the ear pads from the A 200.
2 Clean the ear pads with warm soapy water and rinse thoroughly. Let
the ear pads air dry.
1
Specifications
A 200 personal sound amplifier
Frequency response
Max. SPL (at 1 kHz)
Acoustic amplification, stereo
Pick-up pattern of microphones
Supply voltage
Current consumption
Operating time
Weight (incl. rechargeable battery) approx. 51 g
Magnetic field strength
L 200 charger and BA 151 rechargeable battery
Input voltage L 200
Current consumption L 200
Charging outputs (2x)
Charging time of
rechargeable battery
2
200 - 12,000 Hz
105 dB
max. 35 dB
omni-directional
2.4 V
approx. 5 mA
up to 12 hours
5,4 mT
12 V
approx. 20 mA
max. 7 mA/max. 2.8 V
approx. 16 hours
A 200 | 9