Adjusting The Sound Amplification - Sennheiser audioport A 200 Notice D'emploi

Using the A 200 personal sound amplifier
Switching the A 200 on/off
Turn the on/off/sound amplification control
overcome a slight resistance.

Adjusting the sound amplification

You can choose between 6 different settings for the sound
amplification 6. Position "1" corresponds to a low sound amplification
and position "6" corresponds to a very high sound amplification.
Use the control
able level.
If you hear a loud noise (feedback), turn the control
until the noise disappears.
5
to adjust the volume to a sufficient and comfort-
5
towards
5
5
6
ON until you
5
towards OFF
A 200 | 7