Sennheiser audioport A 200 Notice D'emploi page 19

Charging and replacing the rechargeable battery
Connecting the charger to the mains
Connect the connector of the mains unit to the socket
charger (12 V DC).
Connect the mains unit to a wall socket. The charger is ready for
operation.
To disconnect the charger from the mains:
Unplug the mains unit from the wall socket.
Charging and replacing the rechargeable battery
The rechargeable battery can be charged whilst installed in the A 200
or separately in the charging compartment at the side of the charger.
Before using the rechargeable battery for the first time, charge it for
at least 16 hours. With a fully charged rechargeable battery, the
operating time is up to 12 hours.
Charging the A 200 with the rechargeable battery installed
After use, place the A 200 into the charging
compartment without exerting too much
pressure, making sure the Sennheiser logo is at
the front.
When the A 200 is placed correctly, the
A
indicator
EU
US
lights up green.
8
8
on the
A
A 200 | 5