Alpine MRD-M500 Mode D'emploi page 23

For MRD-M300 and MRD-M500 Amplifiers
Congratulations on your new V12AccuClass-D
you should know about this unique amplifier that will help you optimize performance for your personal tastes or
particular application. Unlike traditional designs, the V12 AccuClass-D
internal architecture, utilizing both advanced DSP (digital signal processing) and amplification technologies. This
innovative design not only offers unparalleled tuning capability and accuracy, but also allows direct digital coupling
to the power output stage for cleanest and most powerful bass possible. As with any amplifier however, proper
setup is essential if you are to maximize your listening experience. Please read the quick explanation and setup
procedure for each feature listed on the following pages.
Important notes:
To maximize the output power from this amplifier, you must use a 2 ohm load.
•
Before adjusting the amplifier settings, set the signal source (head-unit) level to
•
minimize distortion.
It is best to utilize music that will represent your typical heavy bass listening
•
scenario when adjusting levels.
Copyright 2002 © Alpine Electronics of America, Inc.
V12 AccuClass-D
Setup Guide
TM
amplifier purchase. Before you get started, there are a few things
TM
amplifier employs a completely digital
Rev. A-101502