Control Panel - Nobles Scout 5 Manuel De Fonctionnement

Control Panel LED Code Guide
LED CODE
One sweeping mode LED is solid
One sweeping mode LED is
flashing fast
One sweeping mode LED is
flashing slowly and battery
discharge indicator is flashing
All sweeping mode LED's are
flashing fast

Control Panel

Nobles Scout 5 (07-2017)
REASON / FAULT
Normal operating condition
Motor overload has shut down
machine due to obstruction.
Low battery level.
Machine cover is open. The
safety switch has shut down
machine.
Machine is in charging mode.
Battery charger is plugged into
electrical outlet.
Defective battery.
Machine cover lock-down knob is
loose.
Defective, misaligned or loose
machine cover safety switch.
Defective motor(s) or loose
electrical connection to motor.
Loose or damaged electrical
connection.
Main brush and side brush not
properly adjusted.
Motor overload, excessive belt
tension.
Worn or damaged main brushes.
SOLUTION
No action required
Disconnect battery cable and
check main brush, side brush and
fan. Remove obstruction. Reset
circuit breaker button.
Recharge battery.
Close machine cover.
No action required or unplug
battery charger.
Replace battery.
Check lock-down knob to ensure
knob is tight and machine cover
is secure.
Check, adjust or replace switch.
Disconnect battery cable and
check all motors for proper
operation. Reset circuit breaker
button.
Disconnect battery cable and
check electrical harness for loose
or damaged wire connections.
Readjust main and/or brush
height. Reset circuit breaker
button.
Check belt tension for proper
adjustment, replace belt if worn.
Reset circuit breaker button.
Replace main brushes.
15