NAD 116 Manuel D'installation page 33

SPECIFICATION - NAD 116 STEREO PREAMPLIFIER
Phono Input
Input impedance (R and C)
Input sensitivity
Input overload at 20Hz/1kHz/20kHz
Signal/Noise ratio (A-weighted)
THD (20Hz-20kHz) and IM dist.
RIAA response accuracy
Line Level Inputs
(CD,Video,Tuner,Tape 1, Tape 2, Aux)
Input impedance (R and C)
Input sensitivity
Signal/Noise ratio, A-weighted
Frequency response, 20Hz-20kHz
Voltage gain
THD + SMPTE + IHF I.M.
Line Level Outputs
Output impedance
Maximum output level
Physical Specifications
Dimensions in mm (Width x Height x Depth)
Net Weight
Shipping Weight
NAD
33
MM 47 k
MC 100 Ohms + 1000pF
MM 1.2mV ref.0.5V
5mV ref. 2V
MC 56µV ref. 0.5V out
240µVfor 2V out
20mV/200 mV/2000 mV
MM 1.2mV/12 mV/90mV
MC 78 dB ref. 0.5mV (cartidge connected)
MM 78 dB ref. 0.5mV (100 load)
MC 82dB with shorted input
<0.02%
±0.3dB
20 k
ref.0.5V 80 mV
ref. 2V 300mV
ref. 0.5V 98dB
ref. 2V 108dB
±0.3dB
16dB
<0.02%
Pre out 220
Tape Source Z + 2k
Headphones 120
Pre out >12V
Tape >10V
Phones >8V into 600
>250mV into 8
435 x 80 x 280
4.2kg
5.5kg
+ 200 pF
+ 450 pF