Specifications; Perception 120 - AKG Perception 120 Mode D'emploi

7 Specifications

7.1 PERCEPTION 120

Type:
Polar pattern:
Open-circuit sensitivity:
Frequency range:
Impedance:
Recommended load impedance:
Equivalent noise level
to CCIR 468-2:
Equivalent noise level
to IEC 60268-4 (A-weighted):
Signal/noise ratio
re 1 Pa (A-weighted):
Max. SPL for 0.5% THD:
Environment:
10
2/3-inch back electret condenser
pressure-gradient microphone
cardioid
18 mV/Pa (-35 dBV)
20 Hz to 20 kHz (see frequency response
trace)
≤ 200 ohms
≥ 1200 ohms
32 dB
22 dB-A
72 dB
130 / 150 dB SPL (0 / -20 dB)
temperature: -10°C to +60°C
R.H.: 80% (+25°C)
Powering:
Current consumption:
Connector:
Dimensions:
Net weight:
Bass cut filter slope:
Preattenuation pad:
48 V ±4 V phantom power
to DIN 45 596 / IEC 268-15
≤ 2 mA
3-pin XLR (pin 2 hot)
53 dia. x 165 mm high / 2 x 6.5 in.
525 g / 1.2 lbs.
12 dB/octave, 300 Hz
-20 dB (switchable)
AKG PERCEPTION 120/220