Specifications - AKG C1000S Mode D'emploi

7 Specifications

Working principle:
Polar pattern:
Frequency range:
Sensitivity:
Max. SPL for 1% THD:
Equivalent noise level (CCIR 468-3):
Equivalent noise level:
Signal/noise ratio (A-weighted):
Electrical impedance:
Recommended load impedance:
Bass cut filter slope:
Attenuation:
Powering:
Current consumption:
Connector:
Finish:
Dimensions:
Net weight:
Shipping weight:
C1000S
This product conforms to the standards listed in the Declaration of Conformity.
To view a copy of the Declaration of Conformity for this product, visit
http://www.akg.com or contact sales@akg.com.
Pre-polarised condenser microphone
Cardioid, hypercardioid (with PPC1000 mounted)
50 to 20,000 Hz
6 mV/Pa (-44 dBV)
137 dB
32 dB
21 dB-A
73 dB
200 ohms
≥ 2000 ohms
Switchable to linear, 80 Hz
Switchable to -10 dB
9 to 52 V phantom power to IEC 61938 or two
AA alkaline or rechargeable batteries
approx. 3 mA
3-pin XLR
matte grayish blue
ø 33.5 x 229 mm / ø 1.32 x 9.01 in.
320 g
510 g
Specifications
27