2 Description
2.2 Unpacking
2.3 Optional
Accessories
2.4 SR 40 Receiver
2.4.1 Front Panel
Controls
Refer to fig. 1.
Table 1: WMS 40
system color code.
2.4.2 Rear Panel
Controls
Refer to fig. 2.
12
1 SR 40
Please check that the packaging contains all system components as
listed above. If anything is missing, please contact your AKG dealer.
RMU 60 19" rack mounting kit for 2 SR 40 receivers
CH 40 plastic carrying case for one complete WMS 40 system.
The SR 40 is a stationary non-diversity receiver for use with all WMS 40
transmitters. The SR 40 operates on one fixed, quartz stabilized fre-
quency in the 710 MHz to 865 MHz UHF carrier frequency range and
features a rack-mount case.
1
POWER: On/off pushbutton switch and indicator LED.
2
Antenna: Fixed-length UHF antenna permanently mounted on the
front panel.
3
VOLUME: This rotary control adjusts the SR 40's output level from
microphone to line level for matching to the input sensitivity of your
mixer or amplifier.
4
RF: This LED lights to indicate that signal is being received. If no
signal is received or the squelch is on, the RF LED goes out and
the audio output is muted.
5
Color Code: The color indicates the carrier frequency of your
receiver. Transmitters tuned to the same frequency are marked
with identical colors.
US54:
710.400 MHz
US58:
734.600 MHz
KR3:
745.650 MHz
KR4:
750.900 MHz
EU62:
802.525 MHz
EU63:
812.800 MHz
UK69A: 854.900 MHz
UK69B: 858.200 MHz
ISM1:
863.100 MHz
ISM2:
864.375 MHz
6
Carrier Frequency Label: A label indicating the carrier
frequency and approval marks of your receiver is affixed to the rear
panel of the receiver.
7
MIC OUT: Balanced 3-pin XLR audio output for connecting to,
e.g., a microphone input on a mixing console.
8
LINE OUT: Unbalanced audio output on a 1/4" mono jack for
connecting to, e.g., a guitar amplifier.
9
Screwdriver for adjusting the SQUELCH control on the receiver
and the GAIN control on the bodypack transmitter.
10 Strain Relief for the feeder cable of the supplied AC adapter.
11 DC IN: Input connector for the supplied AC adapter.
12 SQUELCH: The squelch circuit switches the receiver off if the
1 AC adapter, 12 V DC
1 screwdriver
reddish brown
purple
mint green
dark gray
Bordeaux red
yellow
violet
green
melon yellow
gray