Hot Water Function - Beaba Milkeo Mode D'emploi

7. Hot water function

This function is for dispensing hot water at 22 to 70°
6
The water is dispensed at the quantity and temperature indicated on the control panel . You can modify these values
in the same way as for bottle preparation
4
- Place a recipient on the bottle stand
-Press the hot water dispenser button to obtain hot water
Press any button to stop dispensing manually.
8. Auto-clean function
5
The auto-clean function produces hot water to clean the Mixing compartment
4
- Place a recipient able to contain at least 220 ml on the bottle stand
- Remove the powder reservoir
- Press the auto-clean button
- Check that there is enough water in the reservoir before starting the cleaning cycle.
- Replace powder reservoir
9. Cleaning
Cleaning :
1. If there is water on the surface of the product, wipe with a dry cloth. Be sure to lock the control panel with the lock
6
button or switch off the appliance before cleaning the control panel
2. Do not place the product in a humid environment
3. When the product is not used for an extended period, we recommend that you unplug it
5
4. Verify and clean the mixing compartment regularly
15