Assembly Information
1. Also refer to the drawings on the last pages of the manual.
2. Open the carton, put the main frame on the ground.
3. Fix the console cockpit on the uprights using designated screws (see assembly drawing for reference).
Important: Make sure you will not pinch, cut or damage the cable in any way (see hangtag). Please pay special
attention to the wire connecting of the upper board with the lower board. Please also make sure that you connect
the two cables correctly. The connection has been connected well once you hear a "click" sound. Any damage or
incorrect connection will cause major problems operating the machine.
4. Fold and move up the console together with the upright posts.
Important: When you up fold the computer and the uprights, make sure the metal does not damage the inside
wires! Fix the upright onto the base frame with the designated screws (see assembly drawing for reference). Repeat
the same on the other side.
5. If applicable fix the right & left base cover on each upright with the designated screws (see assembly drawing for
reference).
6. If applicable cover the right & left handlebar cover on the computer frame.
7. Attach the safety key to the computer.
Operations
Proper Training Clothes
Please make sure you always wear proper training shoes while working out. It is recommended that you wear training
appropriate exercise clothing's that allow you to move freely whilst exercising.
Exercise Level
Please contact a physician before your exercise program. Immediately stop exercising if you feel any pain or tightness
in your chest, become short breathed of faint. Please contact your doctor before you start using your fitness product
again.
10
www.energetics.eu
Wire