External Control - Pentair INTELLIFLO WFL-VSF Guide De Démarrage Rapide

PUMP OVERVIEW
INTRODUCTION
The IntelliFlo VSF Variable Speed and Flow Pump can be programmed to run at a speed or a constant flow rate
®
over set time intervals for maximum operating efficiency and energy conservation for a variety of inground pools.
• The pump can operate from 450 RPM to 3450 RPM with four preset speeds of 750, 1500, 2350 and 3110 RPM,
or the pump can be set to control its own speed and maintain a constant flow rate.
• The pump can adapt to any application below 38 m³/h. Simply program the pump to suit the application, and
the pump will automatically determine perfect operating conditions for that specific flow rate.
• Up to 8 customizable programs that can be set for constant flow or speed in either Manual, Egg Timer or
Schedule modes.
• Pump control panel alarm LED and error messages warn the user of improper operation.
• Programmable priming mode with automatic detection of prime for easy start-up and automatic detection
of loss of prime.
The control panel can be mounted on the pump in four different directions in order to provide the user the
best access. The control panel can also be mounted in a more convenient location with the help of the keypad
relocation kit (P/N R356905).

EXTERNAL CONTROL

The IntelliFlo VSF pump can communicate with an IntelliPool control system or the IntelliComm
®
center via a two-wire RS-485 communication cable. The communication cable is included with the control system.
IntelliComm can remotely control the IntelliFlo
®
be configured to control speed in function of pool temperature, size and active features.
FEATURES
• Adjusts to various pool sizes
• Prevents thermal overload
• Detects and prevents damage from under and over voltage conditions
• Protects against freezing
• Communicates with IntelliPool control system or an IntelliComm communication center
• Easy to use operator control panel
• Operator control panel buttons for speed control
• Built-in strainer pot and volute
• Ultra energy-efficient TEFC Square Flange Motor
• Compatible with most cleaning systems, filters, and jet action spas
• Motor assembly features permanent magnet synchronous motor
• Heavy-duty, durable construction designed for long life
• 12 Programmable Speeds
• Speed 1-4: manual, egg timer or schedule
• Speed 5-8: schedule
• Four IntelliComm speed modes
• Priming Feature
• Load Sensing
• Enable or Disable
• Lockout Protection
• Four Digit password
• Enable or Disable
• LCD Display
• Power and Speed / Flow
• Text Alerts
• Antifreeze Protection
• Adjustable Speed / Flow
• Adjustable Temperatures
• Enable and Disable in stand alone
6
Variable speed four preset speeds. The IntelliPool system can
®
communication
®
P-QSG-VSF - Rev.November 2017