Technical Specifications - Life & Mobility Match Mode D'emploi

Technical specifications

OW
BH
LW
SW front
WW front
WW rear
Expected service life
Life & Mobility assigns a service life of 7 years to
this product. This means that during this period, the
product is fixable, safe and usable.
The statement above is only applicable if the user
uses the product in the manner that Life & Mobility
intended, marked with CE and including any original
accessories.
EN10
MD
AH PH
HMO
SH
BP
WB
Abbrev. Description
OW Moulded seat width Pushchair
Moulded seat width Self-propelled
SH Seat height*
MD Moulded seat depth
WB Wheel base
WW rear Wheelchair width Pushchair rear
Wheelchair width Pushchair front
WW front Wheelchair width front
BP Balance point
AH Armrest height
LW Legrest width
Comfort legrest:
BH Back support tube height
PH Push bar height
LL Lower leg length
Comfort legrest:
Central legrest:
HMO Height of moulded seat
- Seat angle adjustment**
- Backrest angle adjustment
- Armrest depth
- Total weight Pushchair
- Total weight Self-propelled
- Maximum occupant weight
- A CE-certified and crash test safe
Match - moulded seat combination
complies to
- Ambient temperature
* Attention: At the lowest and highest seat heights, the wheel positioning relative to the
shoulder joint is not optimal for driving of the wheelchair.
** Attention: Depending on height, moulded seat width, moulded seat shape and balance
point, the adjustment range may be limited.
Technical specifications
Measurements
42 - 67 cm (elbow 1 & 2)
42 - 60 cm (at seat height column 1:
max. moulded seat width 50 cm)
30 - 60 cm (columns 1, 2, 3 & 4)
40 - 65 cm
50 - 60 cm
55 - 70 cm (SW + 5 cm)
60 - 75 cm (SW + 10 cm)
60 - 75 cm (SW + 10 cm)
Adjustment length 15 cm
17 - 40 cm
39 - 69 cm
52 cm
80 - 150 cm (range adjustable, PH
depends on SH)
35-45 cm / 40 - 55 cm
depends on HMO
Vertical distance top of assembly plate
-bottom lower leg on the front of the
moulded seat
-5º -30º (range is adjustable)
85º - 140º (range is adjustable)
Adjustment length 8 cm
37,5 kg (not including moulded seat)
39 kg (not including moulded seat)
160 kg
EN 12182
EN 12183
ISO 7176-19:2008
Life & Mobility recommends using
the Match at an ambient temperature
between -5˚C and +40˚C.
EN11