1- Introduction; Dialling Mode; Hook Flash Setting; Message Waiting Lamp - Depaepe Telecom PREMIUM 100 Notice D'utilisation

1- INTRODUCTION

Premium 100/200 telephones feature 10 one touch memory keys, 10 two touch memory locations,
microphone mute, full duplex speakerphone (Premium 200 only), Headset function (Premium 200
only).
A message waiting lamp indicates incoming calls and blinks or lights steadily when a message is
waiting for the user (This will only work with some PBXs)
Premium 100/200 are also fitted with a data port for use with a personal computer or a portable fax.

2 - DIALLING MODE

Tone and Pulse mode are available. Factory setting is Tone dialling.
Choose your dialling mode as follows (Phone connected and off hook):
Pulse mode: «
Tone mode : «

3 - HOOK FLASH SETTING

100/300/600ms Flashing times are available. Factory setting is 300ms.
Choose your flashing time as follows (Phone connected and off hook):
100 ms : «
300 ms: «
600 ms: «

4 - MESSAGE WAITING LAMP

Located on the front of the telephone, it blinks with each incoming call even when the ringer switch
is on OFF position.
When connected to some PBXs equipped with message waiting or voice mail systems, it can also
blink or light steadily when a message is waiting for the user.
A selection of 3 different systems is available.
- Ringing Current.
- DC high voltage (80-100 Volts).
- Reverse polarity.
Ringing
Current
» « » «
» « » «
» « » «
» « » «
» « » «
Reverse
polarity
» « »
» « »
» « »
» « »
» « »
DC high
voltage
80 Volts
10