Bis/P Lnr Key; Barring And Locking - Depaepe Telecom PREMIUM 100 Notice D'utilisation

5 - Press
6 – Repeat 2 to 5 if you want to erase another telephone number from memory
7 – Replace the handset or press
- Recalling a stored number
From one-touch memory:
1 – Pick up the handset or press
2 – Press one of the memory locations M1 to M10 and numbers stored will be dialled out
automatically.
From two-touch memory:
1 – Pick up the handset or press
2 – Press
dialled out automatically.

11 - BIS/P LNR key

For last number redial, pick up the handset, press
To erase the LNR memory, after hang up, pick up the handset and keep pressed the
2 seconds, a double sharp sounds in the handset confirms the erasing
12 – CODE
Factory code is "0000".
If you want to change the code proceed as follows (Phone connected and off hook):
« » «
the operation) « NNNN »(New code) «
operation)
Lost code:
Phone on hook, press and keep «
release the keys (2 sharp sounds in the handset confirms the operation) the phone is totally reset
(Memories are erased and the phone gets back to factory settings)

13 - BARRING AND LOCKING

To activate or deactivate the barring and locking function: Phone on hook, press and keep
« » key pressed, pick up the handset, release the key and dial the 4 digits code (0000 Factory
setting).
The unlocked phone gets locked.
The locked phone gets unlocked.
When the phone is barred, no programming, no memories are possible. The keypad can be used but
only up to 4 digits.
to confirm the erasing
or
or
or
and one of the memory locations M11 to M20 and numbers stored will be
» « » « 0000 » (Old Code) (2 sharp sounds in the handset confirms
» «
buttons
buttons,
buttons,
or buttons and press the
(2 sharp sounds in the handset confirms the
» « » keys pressed , pick up the handset and
key.
during
13