1- Introduction; Dialling Mode; Hook Flash Setting; Message Waiting Lamp - Depaepe Telecom PREMIUM 100 Notice D'utilisation

1- INTRODUCTION

Premium 100/200 telep
m icrophone mute, full duplex speakerphone (Premium 200 only), Headset function (Premium 200
only).
A message waiting lamp indicates incoming calls and blinks or lights steadily when a message is
waiting for the user (This will only work with some PBXs)
Premium 100/200 are also fitted with a data port for use with a personal computer or a portable fax.

2 - DIALLING MODE

Tone and Pulse mode are available. Factory setting is Tone dialling.
C hoose your dialling mode as follows (Phone connected and off hook):
Pulse mode: «
Tone mode : «

3 - HOOK FLASH SETTING

100/300/600ms Flashing times a
C hoose your flashing time as follows (Phone connected and off hook):
100 ms : «
300 ms: «
600 ms: «
4 - MESSA GE W AITIN
Located on the front of the telephon
is on OFF position.
When connected to some P
b link or light steadily when a message is waiting for the user.
A selection of 3 different systems is available.
- Ringing Current.
- DC high voltage (80-100 Volts).
- Reverse polarity.
Ringing
Current
hones feature 10 one touch memory keys, 10 two touch memory locations,
» « » «
» « » «
re available. Factory setting is 300ms.
» « » «
» « » «
» « » «
G LA MP
e, it blinks with each incoming call even when the ringer switch
BXs eq ipped with message waiting or voice mail systems, it can also u
Reverse
polarity
» « »
» « »
» « »
» « »
» « »
DC high
voltage
80 Volts
10