TOOLS INCLUDED:
5 mm allen Wrench (w/ Screw Driver)
8 mm allen Wrench
13/15 mm flat Wrench
PARTS BOX INCLUDED:
1 Main frame
1 Left Handlebar
1 right Handlebar
1 Back console Mast cover
1 front console Mast cover
1 console Mast (with console)
1 Hardware Bag
2 Handlebar cover
1 Owner's Manual
1 Power cord
1 Bottle Holder (only andes 3)
PRE aSSEMBLY
UNPACKING
unpack the product where you will be using it. Place the elliptical carton on a
level flat surface. It is recommended that you place a protective covering on
your floor. Never open box when it is on its side.
IMPORTANT NOTES
• It is recommended that two people work together for ease and
efficiency while assembling an elliptical.
• During each assembly step, ensure that aLL nuts and bolts are in
place and partially threaded. It is recommended you complete the full
assembly of your unit before completely tightening any ONE bolt.
• Several parts have been pre-lubricated to aid in assembly and usage.
Please do not wipe this off. If you have difficulty, a light application of
lithium bike grease is recommended.
NEED HELP?
If you have questions or if there are any missing parts, contact customer
tech Support. contact information is located on the back panel of this
manual.
5