Troubleshooting; Storage; Disposal; Technical Specifications - Spring PizzaRaclette6 Mode D'emploi

11

Troubleshooting

Problem
The PizzaRaclette6 does not heat up.
Possible cause
1. No power input
2. Internal defect
Solution
1. Plug the power cord of the appliance into a suitable socket. Make sure the socket has the proper voltage.
2. Contact your dealer or service office.
In case of malfunctions or questions of any kind, please contact your sales or service center or directly:
Spring International GmbH
Höhscheider Weg 29
D-42699 Solingen
Germany
www.spring.ch
12

Storage

Store the PizzaRaclette6 in a dry location. Moisture can lead to malfunctions.
Store the appliance and the power cord out of the reach of children.
13

Disposal

At the end of its usable life, the PizzaRaclette6 must be disposed of properly. The PizzaRaclette6 contains electrical
and electromechanical components. Follow the regulations in your country. When disposing of it, ensure that the
PizzaRaclette6 cannot be operated again by third parties.
14

Technical specifications

Designation
Plug
Voltage+
Frequency
Power consumption
Nominal power
Dimensions L x W x H
Length of the power cord
Raclette6
Schuko (grounded) (EU)
230 VAC
50 Hz
5 A
1100 W
450 mm × 200 mm × 130 mm
1.5 meters
GB
GB
43