Nicols POWER FLOWER Manuel D'utilisation page 19

1. Display: To show the various menus and the selected functions
3. Button
MENU
DOWN
UP
ENTER
3. LED
DMX
MASTER
SLAVE
SOUND
5. Only for remote control : By connect to the 1/4'' microphone jack to control the unit
for Stand by, Function and Mode function.
5. DMX input : For DMX512 link, use 3-pin XLR plug cable to link the unit together.
6. DMX output : For DMX512 link, use 3-pin XLR plug cable to link the unit together.
7. Mains input : IEC socket and integrated fuse holder, connect to main power cable.
8. Power output : Connect to supply power for the next unit.
9. Safe ring : Keep the installation safe.
10. Microphone: Receive music for the sound active.
4.2 Replace the lens
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
On
On
On
Flashing
You could replace the other lens if you want to, as following picture.
You should screw the lens roller to take it down as NO.1, and bring the
lens out as No.2. Then you could replace the lens that you want to.
DMX input present
Master Mode
Slave Mode
Sound activation
18-