Quick Start Guide - shark ION Robot RV750EU Guide D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

QUICK START GUIDE

2 WAYS TO CLEAN
1 - WITH the SharkClean App.
Download the SharkClean App using an Android or IOS smartphone.
2 - WITHOUT the SharkClean App.
By simply pressing the Clean or Dock button on the Robot.
SECTION A - PREPARING THE ROBOT
STEP 1
STEP 2
(2 per pack)
STEP 2 Firmly press two brushes
STEP 1 Locate the brushes which
onto the square pegs. Save the
are stored in the box (4 brushes
remaining brushes for future use.
supplied).
SECTION B - PREPARING THE CHARGING DOCK
STEP 1
STEP 2
1m
1m
1.6m
STEP 1 Find a permanent location
STEP 2 Plug in the Charging Dock.
for the Charging Dock, with its back
against a wall, in an area with a good
Wi-Fi signal. For best results, set up
Charging Dock on a hard floor.
The space surrounding the Charging
Dock is only a guide. The Robot will
often operate in smaller spaces, but it is
recommended to give the Robot a wide
space to dock more easily.
6
6
s h a r kc l e a n . e u
STEP 3
STEP 3 Switch on the Robot.
STEP 3
6
h
1
2 GET STARTED: Click on 'Get Started' and have your
STEP 3 Place the Robot on the
3 POWER ON: Switch on the Shark® ION Robot by
Charging Dock to charge. You will
hear a beep when charging begins
and the light on the side of the
4 LOCATION: Position the Charging Dock Base on a
Charging Dock will change from green
to blue.
SECTION C - SETTING UP THE APP
STEP 1 - DOWNLOAD THE SHARKCLEAN APP
Search SHARKCLEAN using your smartphone
STEP 2 - CREATE AN ACCOUNT
EMAIL
PASSWORD
Welcome!
Welcome!
Thanks.
Lets create your new
Thanks.
Lets create your new
Shark account.
Next, add a password.
Next, add a password.
Shark account.
Enter your email
Enter your email
I agree to the Terms & Conditions
CONTINUE
I agree to the Terms & Conditions
CONTINUE
CREATE MY ACCOUNT
CREATE MY ACCOUNT
SIGN IN TO MY ACCOUNT
SIGN IN TO MY ACCOUNT
SIGN IN TO MY ACCOUNT
SIGN IN TO MY ACCOUNT
STEP 3 - CONNECT YOUR ROBOT TO WI-FI
GET STARTED
POWER ON
LOCATION
Now let's nd a good
Now let's nd a good
home for your Shark.
Let's get your Shark ready
First, turn your Shark on
home for your Shark.
Let's get your Shark ready
First, turn your Shark on
• On a hard surface or low pile carpet
to start cleaning.
using the side switch.
• On a hard surface or low pile carpet
• Wall with 1m of space on sides
to start cleaning.
using the side switch.
Make sure your phone is connected to
Your Shark will prompt you with audio
• Wall with 1m of space on sides
• 1.6m of clearance in front
your home Wi-Fi network, and you have
Make sure your phone is connected to
when it's ready to go. This may take a
Your Shark will prompt you with audio
• 1.6m of clearance in front
your Wi-Fi password ready.
your home Wi-Fi network, and you have
moments.
when it's ready to go. This may take a
• Area with strong Wi-Fi
your Wi-Fi password ready.
moments.
• Area with strong Wi-Fi
GET STARTED
CONTINUE
MY DOCK IS PLUGGED IN
GET STARTED
CONTINUE
MY DOCK IS PLUGGED IN
ADD A Robot: Click on the Menu icon in the App and
'Add a Robot'
WI-FI password to hand.
turning the on/off switch to the 'on' position (located
Scheduling is on
Scheduling is on
on the side of the Robot). Press 'continue' in the App.
SUN
3.00pm
SUN
3.00pm
flat surface with 1m either side and 1.6m clearance in
3.00pm
MON
3.00pm
MON
front. Then plug into the mains power.
3.00pm
TUE
TUE
3.00pm
3.00pm
WED
WED
3.00pm
3.00pm
THU
THU
3.00pm
3.00pm
FRI
FRI
3.00pm
CONFIRMATION
SIGN IN
We need to con rm
Sign In.
We need to con rm
Sign In.
your email address.
Enter your details below.
your email address.
Enter your details below.
Tap the link we sent to:
Tap the link we sent to:
Email Address
Xyz@email.com
Xyz@email.com
Email Address
Password
Password
RESEND THE EMAIL
CONTINUE
RESEND THE EMAIL
CONTINUE
Already con rmed? Sign in
Create an Account
Forgot password
Already con rmed? Sign in
Create an Account
Forgot password
PAIRING
WI-FI
Select your Wi-Fi network.
Select your Wi-Fi network.
Have separate 2.4 and 5Ghz networks?
Have separate 2.4 and 5Ghz networks?
Select the 2.4Ghz option. Lean more.
Select the 2.4Ghz option. Lean more.
WiFi1
WiFi1
WiFi2
WiFi2
WiFi3
WiFi3
WiFi4
WiFi4
Now let's pair your Shark
WiFi5
Now let's pair your Shark
Success!
to your phone.
WiFi5
to your phone.
Press and hold the left and right buttons
WiFi6
Your Shark is connected.
Press and hold the left and right buttons
WiFi6
on your Shark for 5 seconds.
on your Shark for 5 seconds.
WiFi7
WiFi7
I SEE THE
ICON
WiFi8
I SEE THE
ICON
WiFi8
5 PAIRING: Pair your phone to the Shark® ION Robot
by pressing the left and right buttons on your
Shark® ION Robot.
6 WI-FI: Select 'SharkXXXXXXXXXX' in your WI-FI
settings and then return to the SharkClean App.
In the SharkClean App proceed to connect
CLEANING HISTORY
PAST 30 DAYS
CLEANING HISTORY
PAST 30 DAYS
your Shark® ION Robot to WI-FI by entering your
WI-FI password.
Run Time
Cleaning Runs
Area Cleaned
3.3 hrs
9
129 m
2
Run Time
Cleaning Runs
Area Cleaned
3.3 hrs
9
129 m
2
7 CONNECTED: Wait 1-2 mins for your Shark® ION
March
March
Robot to connect to WI-FI.
8
9
10
11
12
13
13
8
9
10
11
12
13
13
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CHARGING 46%
February
CHARGING 46%
February
25
26
27
28
29
30
31
25
26
27
28
29
30
31
18
19
20
21
22
23
24
18
19
20
21
22
23
24
Schedule
Clean
History
s h a r kc l e a n . e u
11
12
13
14
15
16
17
Schedule
Clean
History
11
12
13
14
15
16
17
NEXT CLEANING
CONNECTED
Success!
Your Shark is connected.
CONTINUE
CONTINUE
7
7

Publicité

Table des Matières
loading

Table des Matières