Motion Sensor - Abus TVAC21000 Manuel Utilisateur

CH: 1
You can select the channel you want here and make the following settings.
TITLE
Define the camera names using the [+] and [-] keys. 36 characters are available as follows:
0 1 2 3 4
R S T U
BRIGHTNESS
Sets the brightness for cameras 1–4 (CH1–CH4). You can select values between -100 ("MIN") and 100
("MAX").
CONTRAST
Sets the contrast for cameras 1–4 (CH1–CH4). You can select values between -100 ("MIN") and 100
("MAX").
SATURATION
Sets the saturation for cameras 1–4 (CH1–CH4). You can select values between -100 ("MIN") and 100
("MAX").
HUE
Sets the colour hue for cameras 1–4 (CH1–CH4). You can select values between -100 ("MIN") and 100
("MAX").

8.5 Motion sensor

CH: 1
You can select the channel you want here and make the following settings.
DETECTION TIME
Selects the time range when motion detection is activated and deactivated.
If you select 'ALWAYS ON', motion detection is always activated. You cannot make settings for the start
and end times.
5 6 7 8 9 A
V W X Y Z
CH: 1
↑↓ Select
Fig. 9: Motion sensor
B C D E F G
MOTION SETUP
DETECTION TIME
ALWAYS ON
ON TIME: 11:00
OFF TIME: 12:00
SENSIVITY: 0
VELOCITY: 0
MASKING AREA:
X,Y : (00,00)
+ - Adjust
33
H I J K L M N
VER 1.20
EXIT
English
O P Q