Hdmi Mode - Eneo VMC-17LCD-HMPG1 Mode D'emploi

LCD Panel Frequency Setting (NTSC: 60Hz or PAL: 50Hz)
MENU + (Multi Push - over 3sec): Panel 50Hz. After Setting then DC jack put off and put on.
MENU + (Multi Push - over 3sec): Panel 60Hz. After Setting then DC jack put off and put on.

5.3 HDMI Mode

Main menu
Volume
Contrast
Brightness
Sharpness
Advanced
PIP
Color Temp
OSD Menu
Source
• Volume, Contrast, Brightness, Sharpness
Change the Volume, Contrast, Brightness & Sharpness according to personal preference.
• Advanced Menu
Advanced
H Position
V Position
Aspect Ratio
Audio Input
Recall
• PIP Menu
OSD Menu
Mode
Size
Position
Source
Dynamic Contrast is option to enhance the contrast of the image.
This feature makes the colour much darker and brighter
Color Temp is used to control colour temperature (R/G/B)
Recall the monitor original factory setting
Select one of the options using or followed by Enter.
Adjust the chosen item using or .
0
+58
Exit from item by pressing menu.
+64
+6
HDMI
H Position is used to adjust the horizontal position of the image on the
screen.
0
V Position is used to adjust the vertical position of the image on the
0
screen.
Normal
INT.
Aspect ratio is digital zoom Picture the ratio of 4: 3 (6:9 –> 4:3)
No
Audio Input is the selection of internal or external sound
(internal –> audio within HDMI)
Recall the monitor original factory setting
Mode choose ON/OFF multi window activate or cancel the PIP function
Size select the PIP display size (Small / Medium / Large / PBP)
OFF
Small Position is used to adjust the PiP display position.
POS
(L-UP, R-UP, R-Down, L-Down)
CVBS
Source is select the PiP source (CVBS, CVBS, SVIDEO)
Main picture
HDMI
Sub picture
CVBS,CVBS,SVIDEO
3