Cvbs (& S-Video) Mode - Eneo VMC-17LCD-HMPG1 Mode D'emploi

5.2 CVBS (& S-Video) Mode
Press the MENU button to display the Main Menu Settings. The follow setup menu appears.
Main menu
Volume
Contrast
Brightness
Color
Tint
Sharpness
Advanced
OSD Menu
Source
• Volume, Contrast, Brightness
Change the Volume, Contrast & Brightness according to personal preference.
• Color
Used to minutely adjust colour
• Tint
A djusts all the colours on the screen, but is most noticeable to the eye in reds and yellows, and is also usually set
for pleasing face tones. (Appears in NTSC mode only).
• Sharpness
Sets the desired sharpening enhancement to the picture.
• Advanced Menu
Advanced
Under scan OFF
Anti Burn OFF
TNR strength Mid
Filter ON
L/L Mode OFF
Color
Dynamic Contrast
Color Temp
Recall No
0
+64
+68
+64
0
+6
CVBS
Under Scan adjusts the image size. (ON/OFF)
Anti Burn: This is to prevent the pixel burn on LCD after the use of
display for a long time.
You can turn it on in normal mode or Underscan mode.
– ON i n normal mode: 55minutes (normal screen) –> 5minutes
(underscan screen) –> 55minutes (normal screen).
Automatically being iterating.
– On i n underscan mode: 55minutes (underscan screen) –> 5minutes
(normal screen) –> 55minutes (underscan screen).
Automatically being iterating.
TNR (Temporal Noisy Reduction) strength is activate this feature to
r educe any noisy signal that may appear on the screen.
(LOW / Mid / High)
Filter is used enable or disable the Luminance Filter function
L/L Mode choose ON/OFF function reinforce the L/L (line Lock) function
NOTE: It is recommended to use this function if there are some
Color is select picture Color level (Neutral / VIVID / Individual)
twisting vertical line with Line-Lock camera.