Ironing Recommendations; Vertical Ironing - Reliable Velocity V50 Guide D'utilisation

Masquer les pouces Voir aussi pour Velocity V50:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STEAM READY FEATURE
For those who want to leave their iron on for periods longer than 8 minutes at
a time (without the automatic shut off system activating) the Velocity V50 has a
STEAM READY feature that allows the iron to stay on indefinitely.
To activate this feature, simply keep one of the two steam activation buttons (4)
Fig 3 held for 8 seconds.
After holding the Steam Button for 8 seconds, the LEDs will flash 3 times indicating
that the auto shut off has been deactivated.
To activate the auto shut off again, the V50 needs to be unplugged and then
plugged in again.
DO NOT LEAvE YOUR IRON UNATTENDED WHILE THE STEAM READY FEATURE IS ACTIvATED.

IRONING RECOMMENDATIONS

STEAM IRONING
Operation of this model is similar to that of a professional ironing unit. It allows
for ironing from level 1, the minimum temperature (•) without spitting, dripping or
leaking. The steam flow provided by the compact vapor generator is 30 g/min.
It is recommended to first steam iron and then do a second dry-iron pass to ensure
that the clothing is completely dry to obtain truly professional ironing results.
To iron without steam, simply do NOT press either of the steam buttons (4). It is NOT
necessary to empty the water tank.
To stop the steam, gently press one of the two steam buttons one more time. The
steam will now stop until one of the two buttons is gently pressed again.

vERTICAL IRONING

Gently press one of the steam buttons once to start steaming (to stop
steaming, press a steam button again).
It enables you to remove creases from delicate garments without having to
lay them on the ironing board: jackets, coats, curtains, synthetics, etc.
Place the garment on a hanger, away from other garments (& persons).
Set the temperature selector at position (••), (•••) or (MAX), place the iron
in the vertical position and press the button. At position (••) you will obtain
a more humid "white" steam, which will be more visible, whereas at setting
(•••) and (MAX) the steam is drier and, although the same steam volume
is maintained, it will be harder for you to see.
07

Publicité

Table des Matières
loading

Table des Matières