Ironing Recommendations; Steam Ironing; Vertical Ironing - Reliable The Digital Velocity V100 Guide D'utilisation

Masquer les pouces Voir aussi pour The Digital Velocity V100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To activate this feature, simply keep the steam selector button Fig 2 (i)
held for 5 seconds.
If you do this, the Auto-Pause symbol on the display will blink for 10 seconds to
warn you.
For safety reasons, every time you manually turn the iron off or unplug the iron,
when the iron is turned back on or plugged back in, it will go back to its default set-
ting (auto shut off activated after 8 minutes).
DO NOT LEAVE yOUR IRON UNATTENDED WHILE THE STEAM READy™
FEATURE IS ACTIVATED.

IRONING RECOMMENDATIONS

Since the working of this model is similar to an ironing station (with separate
boiler) and due to its strong flow of steam at max. 30 gr/min, we recommend that
you iron with medium steam at temperature positions 1 and 2, and maximum
steam for temperature positions 3 and MAX. We also recommend that you iron first
with steam (the level appropriate to the garment you are going to iron) and go
over the clothes dry to remove the moisture and obtain results comparable with
professional pressing.
To iron without steam, simply do NOT press the steam On/Off switch Fig 2 (g).
It is NOT necessary to drain the water tank when dry ironing.

STEAM IRONING

This model enables you to iron with steam at a temperature setting as low as
position 1 (•). It has two steam volume rates, med. 15gr/m and max. 30gr/m.
For more information on the steam volume rates, refer to the section "Ironing
Recommendations."

VERTICAL IRONING

Keep the steam button pressed to obtain steam during vertical ironing.
It enables you to remove creases from delicate garments without having to
lay them on the ironing board: jackets, coats, curtains, synthetics, etc.
Place the garment on a hanger, away from other garments (& persons).
Set the temperature selector at position (••), (•••) or (MAX), place the iron
in the vertical position and press the button. At position (••) you will obtain
a more humid "white" steam, which will be more visible, whereas at setting
(•••) and (MAX) the steam is drier and, although the same steam volume
is maintained, it will be harder for you to see.
08

Publicité

Table des Matières
loading

Table des Matières