Stopping The Engine - Honda Power Products HHH25D Manuel De L'utilisateur

1.Release the throttle lever and throttle lock lever.
2.Turn the engine switch to the OFF position.
Visually check that the cutter blade has stopped.
3.Before placing the hedge trimmer on the ground, make sure that the
engine and the cutter blade have stopped.
CAUTION:
Even after the operating force stops, the cutter blade runs for a few
seconds by inertia.
4.After operation, install the cutter blade cover into the cutter blade.
CAUTION:
Note that the cutting attachment keeps turning for a while by inertia
after the engine is stopped.
HHH25D:
HHH25S:

8. STOPPING THE ENGINE

OFF
THROTTLE LEVER
OFF
OFF
OFF
RELEASED
ENGINE SWITCH
RELEASED
43