Honda Power Products HHH25D Manuel De L'utilisateur page 45

Turn the rear handle (HHH25D)
1.Be sure to stop the engine when you turn the rear handle.
2.To turn the rear handle, release the throttle lever and the throttle lock
lever, grip the rotation lever, and turn the handle clockwise or
counterclockwise.
3.Before operation, turn the rear handle until it clicks. Make sure that
the rotation lever moves back.
• Do not operate the throttle lever, throttle lock lever and rotation lever
at the same time. If you do, it may cause a failure.
• Do not overreach.
• Keep the cutter blade below your knee height.
• Keep all part of your body away from the operating cutter blade and
hot surfaces.
42
ROTATION
LEVER