Talk Function; Battery Status Indications; Battery Low - Philips SCD570 Manuel D'installation

Press and hold the - button for more than
2
2 seconds to set the volume to off.
The message 'MUTE' and the mute symbol
•
appear on the display.
Note:
D
If the volume is off, only the sound level
lights show that the baby produces sounds.

6.2 Talk function

You can use the TALK button on the parent unit
to talk to your baby (e.g. to comfort your baby).
Press and hold the TALK button and talk
1
clearly into the microphone on the front of
the parent unit from a distance of 15-30cm
(0.5-1ft).
Note:
D
If you have set the volume for the lullaby
higher on the baby unit, the sound will also be
louder when you use the talk function on the
parent unit.
• The 'link' light starts flashing green and the
message 'TALK' appears on the display.
Release the TALK button when you have
2
finished talking.

6.3 Battery status indications

The battery charge status is indicated on the
display by the battery status indicator and by text
messages.

6.3.1 Battery low

When the rechargeable batteries are low, the
remaining operating time is at least 30 minutes if
the baby monitor works in normal mode at the
highest settings.
The battery status indicator on the display is
1
empty and flashes.
The message 'BATTERY LOW' appears on the
2
display.
The battery status light flashes red slowly.
3
The parent unit beeps every 10 seconds in
4
the first 3 minutes. Then it continues to beep
every minute.
11