General Safety Precautions; Particular Safety Instructions; Observing The Instructions - Daikin Altherma 3 H HT ECH2O ETSH16P30D Guide De Référence Installateur

1

General safety precautions

1.1

Particular safety instructions

WARNING
Devices that have not been set up and
installed correctly can impair the func-
tion of the device and/or cause serious
or fatal injury to the user.
▪ Work on the indoor unit (e.g. set-up,
inspection, connection and initial
commissioning) may only be carried
out by persons who are authorised
and have successfully completed
qualifying technical or vocational
training and who have taken part in
advanced training sessions recog-
nised by the relevant responsible au-
thorities for the specific activity.
These include, in particular, certified
heating engineers, qualified elec-
tricians and HVAC specialists
who, because of their professional
training and expert knowledge,
have experience in the professional
installation and maintenance of heat-
ing, cooling and air conditioning sys-
tems as well as hot water storage
tanks.
WARNING
Disregarding the following safety in-
structions may result in serious phys-
ical injury or death.
▪ This device may only be used by
children aged 8 and above and by
persons with restricted physical,
sensory or mental capabilities or with
a lack of experience and knowledge
if they are under supervision or if
they have been instructed in the safe
use of the equipment and under-
stand the dangers arising from it.
Children must not play with the
device. Cleaning and user mainten-
ance must not be carried out by
children without supervision.
Daikin Altherma ETS(X/H)(B)-D
Heat pump (indoor unit) with integrated heat accumulator
008.1447299_00 – 06/2019 – EN
1 General safety precautions
▪ Establish the power supply in ac-
cordance with IEC 60335-1, via a
separate isolator which separates all
poles with a contact opening dis-
tance that provides full disconnection
in accordance with overvoltage cat-
egory III.
▪ All electrical work must only be car-
ried out by electrically qualified ex-
perts and with consideration of the
local and national regulations and
the instructions in this manual.
Ensure that a suitable electrical cir-
cuit is used.
Insufficient load capacity of the elec-
trical circuit or improperly executed
connections can result in electric
shock or fire.
▪ The customer must install a pressure
relief device with a rated over-pres-
sure of less than 0.6 MPa (6 bar).
The connected drain line must have
a continuous gradient and a free out-
let in a frost-free environment (see
Chap. 3.3).
▪ Water may drip out of the drain line
of the pressure relief device. The
drain opening must be left open to
atmosphere.
▪ The pressure relief device must be
operated regularly in order to re-
move scale deposits and to make
sure it is not blocked.
▪ The storage tank and hot water cir-
cuit can be drained. The instructions
in Chap. 8.1 must be observed.
1.1.1

Observing the instructions

▪ The original documentation is written in German. All other lan-
guages are translations.
▪ Please read this manual carefully and thoroughly before proceed-
ing with the installation or modification of the heating system.
▪ The precautionary measures described in this document cover
very important topics. Follow them meticulously.
▪ The installation of the system and all activities described in this
manual and the applicable documents for the installer must be
carried out by an approved installer.
Installer reference guide
3