Tv Operations - Clarion ADZ625 Mode D'emploi

TV Operations

TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a TV
1. Press the [FNC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles be-
tween TV1 and TV2.
3. Press the [ ] button or the [
tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video cas-
sette recorder (VCR) to the TV tuner input termi-
nal.
1. Press the [RDM] button to select VTR.
2. To return to the TV broadcast, press the [RDM]
button.
Tuning
There are 3 types of tuning mode available, Seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired
TV band (TV1 or TV2).
∗ If "MANU" is lit in the display, press and hold
the [BND] button for 1 second or longer.
"MANU" in the display goes off and seek tun-
ing is now available.
2. Press the [ ] button or the [
automatically seek a station. Press the [
button to automatically tune up the frequency
band to the next available TV station; press
the [ ] button to automatically tune down.
24
ADZ625
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BND] button and select the desired
band (TV1 or TV2).
∗ If "MANU" is not lit in the display, press and
hold
"MANU" lights in the display and manual tun-
ing is now available.
2. Tune into a station.
] button to
G Quick tuning:
Press and hold the [
ton for 1 second or longer to tune in a station.
G Step tuning:
Press the [
manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for later
recall.
1. Press [BND] button and select the desired TV
band (TV1 or TV2).
2. To recall a stored TV station, turn the [PRE-
SET] knob either clockwise or counterclock-
wise to select that station.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press the [M] button.
"CH" is lit in the display.
] button to
3. Turn the [PRESET] knob either clockwise or
]
counterclockwise to select the desired preseet
memory.
4. Press and hold the [M] buttos for 2 seconds
or longer to store that station into preset
memory.
the [BND]
button for 1 second or longer.
] button or the [
] button or the [
] but-
] button to