Problem With Results - Siemens TQ505DF8 Notice D'utilisation

en Troubleshooting

Problem with results

Fault
Coffee or milk froth quality
varies widely.
Milk froth quality varies
widely.
Coffee is not dispensed or
has slowed to a trickle.
Set quantity is not reached.
Coffee has no crema.
Coffee is too acidic.
74
Cause
Build-up of limescale in the
appliance.
Milk froth quality depends
on the type of milk or plant-
based alternative used.
Grinding level is set too fine.
Heavy build-up of limescale
in the appliance.
Air is in the water filter.
Appliance is soiled.
Coffee strength is set too
high.
Type of coffee is not optimal.
Beans are no longer fresh.
Grinding level is not appro-
priate for coffee beans.
Grinding level is set too
coarse.
Type of coffee is not optimal.
troubleshooting
Descale the appliance.
▶
→ "Using the descaling pro-
gramme", Page 67
Optimise the result through the se-
▶
lection of the milk or vegetable-
based drink type.
Set a coarser grinding level.
▶
→ "Adjusting the grinding level",
Page 59
Descale the appliance.
▶
→ "Using the descaling pro-
gramme", Page 67
Immerse the water filter in water
1.
with the opening facing upwards
until no more air bubbles escape.
Reinsert the filter.
2.
→ "Inserting and activating the wa-
ter filter", Page 60
Clean the brewing unit.
▶
→ "Cleaning brewing unit", Page 65
Descale and clean the appliance.
▶
→ "Using calc'nClean", Page 68
Reduce the strength of your coffee
▶
to e.g. "regular".
→ "Adjusting the coffee strength",
Page 58
Use a coffee variety with a higher
▶
proportion of Robusta beans.
Use beans with a darker roast.
▶
Use fresh beans.
▶
Adjust the grinder to a finer setting.
▶
→ "Adjusting the grinding level",
Page 59
Adjust the grinder to a finer setting.
▶
→ "Adjusting the grinding level",
Page 59
Use a coffee variety with a higher
▶
proportion of Robusta beans.