Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CMP 583 DAB
CD-MP3 PLAYER
PLAYING A DISC
1.
Select the CD source.
2. Open the CD compartment and insert the disc with the written side facing up. Close the door carefully;
3. After a few seconds the LCD display (1) will show the number of tracks on the disc. Playback will start automatically;
4. Press
ENTER/
(9) button on the unit or
time of the track will begin to flash. Press it again to turn off the pause;
5. Press
(30) button on the remote control to stop playback permanently.
JUMP TRACE AND FORWARD/FAST BACK
1. Press
(3) or
previous or next track;
2. Press
(3) or
send the track back or forward quickly. Release the button to return to normal playback.
REPEAT OF SINGLE TRACE
1. To play a single track continuously, press EQ/RPT (7) on the unit or RPT (18) button on remote control during
playback until "REP-1" appears on the display. The CD player will continuously play the track shown on the display;
2. To cancel uninterrupted playback of the single track, press EQ/RPT (7) on the unit or RPT (18) button on remote
control several times until the "DISC" symbol appears.
DISK REPETITION
1. To continuously play all the tracks on the disc, press EQ/RPT (7) on the unit or RPT (18) button on remote control
during playback until "REP-ALL" appears on the display. The CD player will continuously play all the tracks on the
disc;
2. To cancel the uninterrupted playback of all tracks on the disc, press EQ/RPT (7) on the unit or RPT (18) button on
remote control repeatedly until the "DISC" symbol appears.
FOLDER REPEAT
NOTE: function valid only for MP3 CDs.
1. To play all tracks in a folder continuously, press EQ/RPT (7) on the unit or RPT (18) button on remote control during
playback until "REP-DIR" appears on the display. The CD player will continuously play all the tracks in the folder;
2. To cancel the uninterrupted playback of all the tracks in the folder, pressEQ/RPT (7) on the unit or RPT (18) button
on remote control several times until the "DISC" symbol appears.
RANDOM FUNCTION
1. To randomly play all the tracks on the disc, press EQ/RPT (7) on the unit or RPT (18) button on remote control
during playback until
disc;
2. To cancel random playback of all tracks on the disc, press EQ/RPT (7) on the unit or RPT (18) button on remote
control several times until the "DISC" symbol appears.
PROGRAM
You can select the order in which the tracks are played.
1. Press
(30)
button on remote control to stop playback;
2. Press
PROG (23)
button on the remote control, the message
3. Select the tracks with button
4. Press
PROG
button (23) on the remote control;
5. Repeat steps 3 and 4 to store and play the tracks you want; for audio CDs a maximum of 20 tracks can be stored,
while for MP3 CDs a maximum of 99 tracks can be stored;
6. Press
ENTER/
(9)
7. Press
(30) button

USB INPUT

PLAYBACK
1. Connect a USB device to the USB input (11);
2. Select the USB source. The "USB" will appear on the display;
3. After a few seconds the LCD display (1) will show the number of tracks on the disc. Playback will start automatically.
NOTE: Refer to the CD-MP3 PLAYER OPERATION paragraph for the rest of the functions.
The "CD" will appear;
(8) button on the unit or the button
(8) button on the unit or the button
"RANDOM"
appears on the display. The CD player will randomly play all the tracks on the
(3) or
(8) button on unit or button
button on the unit or press
on the remote control twice to cancel the programming.
(27) button on the remote control
(20),
(20),
(29) on the remote control while listening to
P01 will
(27) button on the remote control
to activate the pause; the elapsed
(29) on the remote control to move to the
appears on the display;
(20) or
(29) on the remote
to start playback;
ENGLISH
control;
15

Publicité

Table des Matières
loading

Table des Matières