Trevi CMP 581 DAB Mode D'emploi Et Installation page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CMP 581 DAB
STORING RADIO STATIONS
To store a radio station, perform the following steps:
1.
Tune to the desired radio station by manual tuning.
2.
Long press the MEM./P-MODE button (2), the display will show PRESET STORE
3.
Use the SKIP- (4) or SKIP + (8) buttons to select a memory location.
4.
Press the PLAY / PAUSE / SELECT button (7) to confirm and save the radio station.
Repeat this operation for each radio station you want to save. There are 30 memory locations available.
CD-MP3 PLAYER
PLAYING A DISC
1.
Select the CD source. The CD MODE will appear.
2.
Open the CD compartment by pressing the word PUSH TO OPEN on the CD compartment and insert the disc with the written side
facing up. Close the door carefully.
3.
After a few seconds the LCD display (1) will show the number of tracks on the disc. Playback will start automatically.
4.
Press the PLAY / PAUSE / SELECT button (7) to activate the pause; the elapsed time of the track will begin to flash. Press it again
to turn off the pause.
5.
Press the STOP / MENU / INFO (3) button to stop playback permanently.
JUMP TRACE AND FORWARD / FAST BACK
1.
Press the SKIP- (4) or SKIP + (8) button to move to the previous or next track.
2.
Press and hold the SKIP- (4) or SKIP + (8) button while listening to send the track back or forward quickly. Release the button to
return to normal playback.
REPEAT OF A SINGLE TRACE
1.
To play a single track continuously, press the MEM./P-MODE button (2) during playback until REP-1 appears on the display. The
CD player will continuously play the track shown on the display.
2.
To cancel uninterrupted playback of the single track, press the MEM./P-MODE (2) key several times until the DISC symbol appears.
REPEAT OF THE ENTIRE DISC
1.
To continuously play all the tracks on the disc, press the MEM./P-MODE button (2) during playback until REP-ALL appears on the
display. The CD player will continuously play all the tracks on the disc.
2.
To cancel the uninterrupted playback of all tracks on the disc, press the MEM./P-MODE (2) key repeatedly until the DISC symbol
appears.
REPEAT OF THE ENTIRE FOLDER
NOTE: function valid only for MP3 CDs.
1.
To play all tracks in a folder continuously, press the MEM./P-MODE button (2) during playback until REP-ALBUM appears on the
display. The CD player will continuously play all the tracks in the folder.
2.
To cancel the uninterrupted playback of all the tracks in the folder, press the MEM./P-MODE (2) key several times until the DISC
symbol appears.
RANDOM FUNCTION
1.
To randomly play all the tracks on the disc, press the MEM./P-MODE button (2) during playback until RANDOM appears on the
display. The CD player will randomly play all the tracks on the disc.
2.
To cancel random playback of all tracks on the disc, press the MEM./P-MODE (2) button longer until the DISC symbol appears.
INTRO FUNCTION
1.
To play the first 10 seconds of all the tracks on the disc, press the MEM./P-MODE button (2) during playback until INTRO appears
on the display. The CD player will play the first 10 seconds of all the tracks on the disc.
2.
To cancel playback of the first 10 seconds of all tracks on the disc, press the MEM./P-MODE (2) button repeatedly until the DISC
symbol appears.
ALBUM FUNCTION
NOTE: function valid only for MP3 CDs containing folders.
1.
While playing an MP3 CD, press and hold the 10 / M. / FOLD + (9) or 10 / M. / FOLD - (5) buttons to move to the next or previous
folder (if any).
2.
While playing an MP3 CD, press the 10 / M. / FOLD + (9) or 10 / M. / FOLD - (5) buttons to move to the next or previous 10th track.
PROGRAM
You can select the order in which the tracks are played.
1.
Press the STOP / MENU / INFO (3) button to stop playback.
2.
Press the MEM./P-MODE button (2), the message P01 appears on the display.
3.
Select the track you want to play first with the SKIP- (4) or SKIP + (8) buttons.
4.
Press the MEM./P-MODE button (2) to confirm.
5.
Repeat steps 3 and 4 to store and play the tracks you want; for audio CDs a maximum of 20 tracks can be stored, while for MP3
CDs a maximum of 99 tracks can be stored.
6.
Press the PLAY / PAUSE / SELECT button (7) to start playback.
7.
Press the STOP / MENU / INFO button (3) twice to cancel programming.
ENGLISH
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cmp 581

Table des Matières