Initial Operation; Inserting Batteries; Setting The Language - TESTO 835 Mode D'emploi

16 6. Initial operation

6. Initial operation

6.1 Inserting batteries

6.2 Setting the language

The measuring instrument has a language-specific user interface. English is set as the
default user language.
1 Switch the instrument on with [
2 Open settings mode with [
3 Use [ ] to select
4 Select the preferred language with [
7. Operation
7.1 Connecting a probe
Connect the temperature probe at the probe socket. Observe the polarity!
7.2 On / Off.
Switch the instrument on: [
The display illumination switches off automatically if no key is pressed for 30
seconds. Pressing any key switches the illumination back on.
Switch off the instrument: [
The instrument switches off automatically if no key is pressed for 2 minutes.
1 Open the battery compartment: open up the
cover.
2 Insert batteries (3x type AA). Observe the polarity!
3 Close the battery compartment: close the cover
again.
].
].
(Language) and open with [
] and apply the setting with [
] or press trigger.
].
].
].