Cleaning The Inside Of The Appliance; Hood Installation - Foster 2463900 Manuel D'installation Et D'utilisation

The manufacturer accepts no liability for any damage caused by non-compliance with the
instructions above.

4. CLEANING THE INSIDE OF THE APPLIANCE

The electrical parts or parts of the blower assembly inside the range hood must not be clea-
ned using liquids or solvents.

HOOD INSTALLATION

WARNING: Failure to install the screws or fixing device in accordance with these instructions
may result in electrical hazards.
Drill, insert the screw anchors ø 5/16 and partially tighten the screws (Pic. 7 B,A,C).
Hook the hood to the screws, tighten the screws after checking if the hood is in the bubble.
To prevent the dropping of the hood due to pressure from below, fasten it to the wall with
screws (Pic. 6).
Install the chimney under the hob, adjut and fix it on the bracket following the picture 8.
13