Other Functions; Changing The Sound Settings; Adjusting The Balance And Fader - Bal/Fad; Customizing The Equalizer Curve - Sony MEX-BT2500 Mode D'emploi

Other functions

Changing the sound settings

Adjusting the balance and fader
— BAL/FAD
1
Press the select button repeatedly
until "BAL" or "FAD" appears.
The item changes as follows:
t HI* t BAL (left-right) t
LOW* 1 1
FAD (front-rear) t AUX*
*1 When EQ lite is activated (page 15).
*2 When AUX source is activated (page 16).
*3 When Bluetooth audio source is activated.
(page 14)
2
Rotate the select button to adjust the
selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 2, to adjust the selected item, press <, M, ,
or m.

Customizing the equalizer curve

— EQ lite

"CUSTOM" of EQ lite allows you to make your
own equalizer settings.
1
Select a source, then press (EQ)
repeatedly to select "CUSTOM."
2
Press the select button repeatedly
until "LOW" or "HI" appears.
3
Rotate the select button to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
With the card remote commander
In step 3, to adjust the selected item, press <, M, ,
or m.
1
2
3
4
2 t BT AU* 3
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
"
CLOCK-ADJ (Clock Adjust) (page 6)
BEEP
AUX-A*
A.OFF (Auto Off)
DEMO*
DIM (Dimmer)
A.SCRL (Auto Scroll)
LOCAL (Local Seek Mode)
Adjusting setup items — SET
Press and hold the select button.
The setup display appears.
Press the select button repeatedly
until the desired item appears.
Rotate the select button to select the
setting (example "ON" or "OFF").
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
" indicates the default settings.
z
To set "BEEP-ON" ( ) or "BEEP-OFF."
z
1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
( ) or "AUX-A-OFF" (page 16).
z
To shut off automatically after a desired time
when the unit is turned off: "A.OFF-NO" (
"A.OFF-30S (Seconds)," "A.OFF-30M
(Minutes)" or "A.OFF-60M (Minutes)."
1 (Demonstration)
To set "DEMO-ON" (
z
To change the brightness of the display.
– "DIM-ON": to dim the display.
– "DIM-OFF" ( ): to deactivate the dimmer.
z
To scroll long displayed item automatically
when the album/track is changed.
– "A.SCRL-ON" ( ): to scroll.
z
– "A.SCRL-OFF": to not scroll.
– "LOCAL-ON" : to only tune into stations with
stronger signals.
– "LOCAL-OFF" ( ): to tune normal reception.
z
continue to next page t
),
z
) or "DEMO-OFF."
15