Publicité
English
TO REMOVE/REPLACE COMFORT LINING
Before removing comfort lining, remove cheek pads as per previous
instructions.
The comfort lining is secured to the helmet by 3 hook-and-loop fasteners ( 2
at the front and 1 at the rear) and 2 tabs (1 on either side tucked behind the
cheekpads).
To remove, gently remove the 2 hook-and-loop fasteners at the front.
Pull out the 2 tabs on both sides of the comfort lining from between the shell
and EPS liner.
Lift neck roll pad slightly, gently remove hook-and-loop fastener at the rear.
Fold the front pad inward making an "M" shape and pinch the rear sides of
the comfort lining into a "V" shape and lift the liner up and out of the helmet.
16
Publicité
Chapitres
