Gardeo PRO GPDCBT43 Traduction Des Instructions Originales page 93

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Do not cut with dull, cracked or
damaged meal blade.
Before cutting growth, inspect for
obstructions such as boulders, metal
stakes or strands of wire from broken
fences. If an obstruction can not be
removed, mark its location so that you
can avoid it with the blade. Rocks and
metal will dull or damage a blade. Wire
can catch on the blade head and flap
around or be thrown into the air.
SCYTHING WEEDS.
swinging the blade in a level arc. It can
quickly clear areas of field grass and
weeds. Scything should not be used to
cut large, tough weeds or woody
growths.
NOTE
Do not use a brush blade to cut trees which
exceed a diameter of 1/2 to 3/4 inches.
CUTTING WITH A BLADE
△ △ △ △
DANGER
,!
This is cutting by
11
△ △ △ △
WARNING
DO NOT USE A BRUSH CUTTER FOR
CUTTING TREES. Otherwise kickback may
occur when the edge of the blade touches tree.
It may cause a lightning fast reverse reaction,
kicking the blade back towards the operator.
The reaction may cause you to lose control of
the machine which could result in serious
personal injury.
WARNING
Use the shoulder harness at all times
adjust both harness and harness clamp
on the unit so that the unit hangs a few
inches above ground level .The cutting
head and the metal debris shield should
be level in all directions. Harness the
unit on the right side of your body.
DANGER
,!
△ △ △ △
DANGER
,!

Publicité

Chapitres

Table des Matières
loading

Table des Matières