Controls And Functions; Front Panel - Yamaha CD-N500 Mode D'emploi

Front panel

1
2 3 4
1 Power indicator
• Lights up:
This unit is in a state that you can switch the unit to on or
standby mode with the remote control or mobile devices
(when network standby mode is on), or this unit is turned
on.
• Lights up dimly:
This unit is in a state that you can turn the unit on with the
remote control (when network standby mode is off).
• Off:
This unit is turned off and you can turn the unit on with the
power switch on the front panel of the main unit only.
y
You can switch the setting of the network standby mode to
on or off in the setup menu (☞ P.24).
2 Power switch (☞ P.10)
Switches this unit between on and off.
: On : Off
3 Remote control sensor (☞ P.4)
Receives infrared signals from the remote control.
4 USB port (☞ P.20)
Connects your iPod or USB devices.
5 SOURCE (☞ P.14, 16, 18, 20, 22)
Selects an audio source. Each press cycles the audio sources
as follows.
CD → USB → SERVER → NET RADIO → Back to CD
6 PURE DIRECT
Turns on or off PURE DIRECT mode. Audio quality will be
improved when PURE DIRECT mode is on.
y
The PURE DIRECT indicator lights up when PURE
DIRECT mode is on.

CONTROLS AND FUNCTIONS

SOURCE PURE DIRECT
5V 2.1A
5 6
7 8
9 0
7 Disc tray
Loads a disc.
8
(Open/Close)
Opens or closes the disc tray.
9 Front panel display
Shows menu items, playback information, etc.
y
For details on display messages, see "Front panel display
messages" (☞ P.29).
0
/ (Play/Pause)
Starts or pauses playback.
A
(Stop)
Stops playback.
B
/ (Skip/Search backward)
/ (Skip/Search forward)
Skips back to the previous/beginning of the current track or
to the next track, or searches backward/forward.
Operations differ depending on audio sources.
C SELECT/ENTER (jog dial) (☞ P.14, 16, 18, 21, 22, 24)
Rotate to select an item and press to confirm the selection.
D RETURN (☞ P.14, 16, 21, 22)
Shows the upper-level menu in the front panel display.
SELECT
ENTER
PUSH
RETURN
A B C D
5
En