Storage, Care, Maintenance And Disposal Of Your Restube Product - Restube automatic Mode D'emploi

6. Storage, care, maintenance and disposal of your RESTUBE product

Lifespan & storability
RESTUBE products are designed to have a long lifespan and can be triggered from 40 to
100 times, depending on the version. Once used, the device is to be stored outside its
packaging, well ventilated and at a maximum temperature of 28°C. The maximum lifespan
of the device is 7 years from the date of purchase, assuming that the care and maintenance
instructions are followed.
If used frequently (more than once per week) or in tropical climates, the product lifespan
may be shorter. If humidity is high, the device should be removed from its box. Do not put
RESTUBE products on radiators and do not dry or store them in direct sunlight.
Care
Maintain your RESTUBE product after every use. Five minutes of your time will help to make
sure that you carry on being able to enjoy the product.
>>> Take the buoy out of its bag and check all parts for external damage: Bag, buoy, trigger,
trigger cord and CO2 cartridge. None of the components should show signs of heavy use,
significant rust or damage.
>>> Following use in saltwater or chlorinated water: Remove the buoy from its bag, and
rinse both in fresh water, ensuring that the oral valve is closed and that the cartridge is
screwed in first. If the product has become particularly dirty, wash it with mild detergent or
a weak solution of lye and rinse it with fresh water afterwards. Do not use cleaning agents
which contain alcohol or solvents.
>>> The buoy and its bag should be opened and hung out to dry. Once dry, pack the system
back up in accordance with the packing instructions.
Maintenance
With a little care, you will be able to maintain your undamaged RETUBE product yourself. If
you are unsure about something, contact us by email: info@restube.eu We will be happy
to carry out a check for you - all you will have to pay for is the costs of postage and for
any replacement parts which may be needed. NOTE: Never carry out any repairs on your
RESTUBE product yourself!
Maintenance intervals
At least every year, as well as before any longer periods of use. Additionally, maintenance
should also be carried out following every inflation.
Visual check
Check all components for damage, wear or deposits: Bag & stitching, waistband and buckle,
buoy, trigger, trigger cord, CO2 cartridge and CO2 cartridge thread (to do this, unscrew the
cartridge and screw it back in again)
Trigger test
We suggest that you trigger your RESTUBE product in the water, so that you can experience
the buoyancy yourself. Once back on land, unscrew the cartridge and move the release
lever as if triggering the device. The pin should move inside the fitting for the cartridge.
24